Direct-applied rendering over existing masonry

Existing masonry is designed as a finish in its own right. It may not be suitable to accept a direct application of render.
 

Common issues and queries you can face

Thumbnail

Dirty deposits accumulated over a period of time

Dirty deposits can form a weak intermediate layer that interferes with the development of the bond of newly applied render.

Thumbnail

Organic growth

Organic growth, even though it may be brushed from the surface, remains in the pores of the substrate and can continue to grow, delaminating the new render from the substrate.

Thumbnail

Poor key

Renders need a combination of mechanical key (texture or roughness) and suction (absorption of the most liquid elements into the substrate) to bond to the wall. Existing masonry surfaces seldom have sufficient key to hold a new render.

Treat, then apply weberend aid and suitable render

Assessment and preparation is of paramount importance. Preparatory key coats are very heavily polymer-modified to 'stick' to 'smooth' substrates and are finished with a deep mechanical key to hold the new render.

  1. Prepare surfaces

    Assess all areas and elevations for contamination. Treat all areas with weber CL150, leave for 48 hours and then remove surface materials with a stiff brush. Power wash dirty and stubborn areas of growth.

  2. Apply key coat

    Apply weberend aid at a 2-3mm thickness approximately 1m² at a time. Texture immediately to leave a deep, heavy stipple key. Treat all elevations to be rendered. Cure as necessary.

    Note: Use weberend aid formulated with sulphate-resistant cement when rendering over substrates that may have a high salt content.

  3. Apply render

    Using your choice of render (ie. monocouche render such as weberpral m or weberend OCR and a synthetic finish), apply and finish new render as directed for the relevant materials.

Contact us

If you have any questions or would like assistance, please contact our technical team:

Our technical team is available Monday to Friday, 8:30am until 5.00pm.

Click Compare to help you choose the right product for your project, if you need further assistance please email technical@netweber.co.uk

Compare