Multi-coat render system which can be applied onto various substrates and finished with a traditional float texture.
weberend traditional texture system is a multi-coat render system which creates a traditional sponged finish. Using a float over the base coat render, finished with a sponge and then painting with a synthetic finish.
This system can be applied onto blockwork, brickwork, or concrete but may require an optional preparatory stipple coat.
To calculate amount of each product needed, please use the consumption calculator on each product page:
webersil P is applied with a brush or roller and provides a highly durable and weather resistant final layer. Available in a wide range of over 100 colours.
Solvent-free, water-based silicone paint (also known as a silicone resin emulsion paint) for application onto masonry substrates and render.
weberend OCR is applied by hand or machine to provide a base coat layer onto the substrate.
weberend OCR is float finished to create a sponged texture which will take a final finish of webersil P.
Pump or hand applied one coat render. weberend OCR avoids the drying time associated with multi-coat render systems and offers results equivalent to traditional two coat renders. Ideal as a base coat to be used with our range of decorative finishes.
Depending on the substrate, weberend aid may need to be specified in order to achieve the correct level of suction and key.
weberend aid is required when applying onto:
weberend aid is not required when applying onto:
weberend OCR can be applied onto blockwork, brickwork or concrete substrates, however an application of weberend aid may be required.
Please click the Optional stipple coat layer in the illustration to learn more.
• Resists the penetration of external water and has excellent weather resistance and durability, whilst allowing the structure to breathe
• Wide selection of colours available
• Factory batched materials for consistency
• Do not apply to gypsum plaster or previously painted surfaces
• Seek advice before rendering onto common brick
• Do not apply if frost is forecast within 24 hours of use
• Do not apply in damp or wet conditions
• Do not apply in temperatures below 5°C or above 30°C
• Not suitable for application onto elevations in direct sunlight or where the substrate is hot
• When stored unopened in a dry place at temperatures above 5°C, shelf life is 12 months from the date of manufacture printed on the side of the bag
