Low maintenance one coat dry dash render system which can be applied onto various substrates and finished with a choice of decorative aggregates.
weberend dry dash system is a one coat system with a decorative aggregate final layer. A preparatory stipple coat is only required if the substrate does not have adequate suction and/or key.
For many applications only weberend one coat dash is required with a coating of decorative aggregates for a durable and low maintenance finish.
To calculate amount of each product needed, please use the consumption calculator on each product page:
A layer of decorative aggregates is applied as the final finish, as well as adding a durable layer of protection.
weberend one coat dash is applied which allows for applying decorative aggregates after a single coat, and is suitable for machine or hand application.
A pebble dash render that can be dashed after a single coat. Also known as dry dash or harling, this product produces a highly durable finish which is ideal for external walls in areas of high exposure.
Depending on the substrate, weberend aid may need to be specified in order to achieve the correct level of suction and key.
weberend aid is required when applying onto:
weberend aid is not required when applying onto:
weberend one coat dash can be applied onto blockwork, brickwork or concrete substrates, however an application of weberend aid may be required.
Please click the Optional stipple coat layer in the illustration to learn more.
• Can be applied in a single pass to create a monolithic coat*
• Avoids curing time of 3-7 days typically associated with traditional multi-coat systems
• Allows for faster application and reduced programme periods
• Suitable for machine or hand application
• Ready mixed — only water required to be added on site for ease of use
• Factory produced for consistency of proportioning
• Provides a coloured background to receive dry dash
*Dependent on criteria such as construction alignment, suction and mechanical key offered by the substrate and weather conditions.
• Do not apply if frost is forecast within 24 hours of use
• Do not apply in damp or wet conditions
• Do not apply in temperatures below 5°C or above 30°C
• Do not use on elevations in direct sunlight or where the substrate is hot
• When stored unopened in a dry place at temperatures above 5°C, shelf life is 12 months from date of manufacture printed on the side of the bag
