weberpral
This means, for many applications only weberpral MF is required to provide a low maintenance fine scraped
To calculate amount of each product needed, please use the consumption calculator on each product page:
Low maintenance fine texture
weberpral
This means, for many applications only weberpral MF is required to provide a low maintenance fine scraped
To calculate amount of each product needed, please use the consumption calculator on each product page:
• Fine texture render for a modern, contemporary finish
• Grain size of 0-1.5mm compared to circa 2.2mm on standard renders
• Smooth render finish allows for the creation of finer ashlar cuts
• One coat for fast application and short programme periods
• Formulated to be spray applied by render pump for faster application
• Through-colour for low maintenance – decoration not required
• Weather-resistant — highly durable and allows the structure to breathe
• Algae-resistant
• Substrates must have a good mechanical key suitable for rendering, weberend aid must be used to provide an artificial key on substrates such as smooth concrete
• Do not apply if frost is forecast within 24 hours of use
• Do not apply in damp or wet conditions
• Do not apply in temperatures below 5°C (for dark colours 8°C) or above 35°C
• Do not use on elevations in direct sunlight or where the substrate is hot
• Not suitable for use on construction board substrate (concrete particle board/render board), use weberend MT
• Not suitable for use on insulation board substrate, use webertherm XP
• When stored unopened in a dry place at temperatures above 5°C, shelf life is 12 months from date of manufacture printed on the side of the bag