How to achieve dry dashed finish

How to achieve dry dash finish

Dry dash finish — also known as pebble dash — is traditionally chosen to provide a tough and long-lasting external facade in high exposure areas. A range of modern decorative aggregates are available to build a truly bespoke design.

For applying onto masonry:

weberend one coat dash is a through-coloured one coat dash receiver which can be applied onto various types of masonry including blockwork, brickwork, and concrete.

Renders are not adhesives and therefore require a substrate with good suction and key to ensure good adhesion. If you are applying onto either of the following, further considerations apply:

  • Brickwork without recessed mortar joints
  • Concrete

In these circumstances, application of a stipple coat — also known as a key coat — such as weberend aid is required. Use our guide on rendering onto surfaces with poor key to learn how to do this. Once suitable key has been achieved, it is possible to apply weberend one coat dash – check the product page for more information and application tutorial. 

Colour charts

weberend one coat dash is available in three popular colours (White, Cream, and Buff) and can be paired with a choice of 16 decorative aggregates.

Things to consider

weberend one coat dash cannot be used on render carrier board or insulation board. There are alternative options available, so please contact us to discuss your requirements.

How it's done

Dry dash is applied using a harling trowel and aggregates are thrown against recently-applied dash receiver.

Contact us

If you have any questions or would like assistance, please contact our technical team:

Our technical team is available Monday to Friday, 8:30am until 5.00pm.

Click Compare to help you choose the right product for your project, if you need further assistance please email technical@netweber.co.uk

Compare