webercem spray CP
Packaging
- 25kg
Dry spray structural repair concrete compatible with cathodic protection systems designed to give high strength, low rebound, low wastage and to maxmise application thickness. Low resistivity means it is suitable for application to structures which receive cathodic protection.
Containing graded inert limestone aggregates and dust suppressants, webercem spray CP has conformity testing to BS EN 1504-3 and meets the requirements for a Class R4 repair product.
Suitable for:
Wall
- Repairs to large areas of structural concrete
- Repairs of highway structures: bridge columns, piers, deck soffits, beams, abutments, parapets, retaining walls, tunnels and viaducts
- Repairs of marine structures: jetties, piers, quays, seawalls, concrete offshore platforms, docks and dry docks
- Conductive overlay over anodes in cathodic protection applications
- Economical - low rebound - less wastage of materials and labour (rebound levels of about 10 - 15% on vertical faces and 25 - 30% on soffits at a thickness of 50 mm can be achieved by an experienced nozzleman using well adjusted equipment)
- Safe to use and handle. Relatively low dust emission, no caustic accelerators
- High-build - up to 100 mm thickness can be applied in one pass on vertical faces
- Good adhesion to well prepared concrete
- Compatible with high quality structural concrete substrates
- Complies with Highways England specifications for repairs to highway structures
- This product, by its nature, is slow setting, strength development in cold weather is slow
- Steps should be taken to protect fresh concrete
- Do not apply if frost is forecast within 24 hours of use
- Do not apply in temperatures below 5°C or above 30°C
- When stored unopened in a dry place at temperatures above 5°C, shelf life is 12 months from date of manufacture