webercem advanced precision grout SP
Replacement for: webercem five star grout SPPackaging
- 25kg
Shrinkage compensated highly flowable precision grout:
- High initial and long term strength development
- Can be pumped, poured or trowelled
- Ideal for use under machinery, grouting rails and bridge bearings
Suitable for:
Floor
webercem advanced precision grout SP is a premixed cementitious grout similar to standard webercem advanced precision grout, developed for applications where an economical grout with good flow, retention of flow and higher strengths is required.
webercem advanced precision grout SP is based on specially selected Portland cements, graded aggregates and admixtures.
webercem advanced precision grout SP is designed primarily as a flowing grout but can also be used at a trowellable consistency.
Meets Highways England Specification for Highway Works, Vol. 1, Clause 2601. Complies with BS EN 1504-3 and -6.
- Complies with HE Specification Clause 2601.4 at 5°C and 20°C
- Precision grout suitable for use over a range of temperatures and site conditions
- Can be pumped, poured or trowelled
- Thermal expansion similar to that of good quality concrete
- Excellent flow properties
- Can be applied in thicknesses from 10mm to 100mm
- Does not significantly lose workability during pot life
- High initial and long term strength development
- webercem advanced precision grout SP must only be used in confined situations, e.g. under baseplates, in holes etc.
- webercem advanced precision grout SP is based on Portland cement and good concreting practice with regards placing and curing especially under winter conditions must be observed.
- Do not add water above the recommended stated dosages.
- Use only clean (potable) water. Avoid leaving unconfined areas of grout proud around bearings etc.
- When stored unopened in a dry place at temperatures above 5°C, shelf life is 12 months from date of manufacture