weberpral M

Final façade finish:

• Finished with either a scraped texture, sprayed roughcast texture or can be dry dashed
• Through-coloured monocouche render available in 24 popular colours
• Can be finished with ashlar and quoin detailing
• Weather and algae resistance for low maintenance

Application

• Applied in two passes as a single coat for shorter programme periods
• Formulated to be spray applied by render pump for faster application but can also be applied by hand with a hawk and trowel
• Can be used onto most types of masonry

Certification & classification

• BBA approved (Certificate number 17/5464)
• Accepted by the NHBC in relation to NHBC standards
• For an NSAI approved product, see weberpral D
• A1 reaction to fire classification in accordance with BS EN 998-1:2016 5.3.3
• Wc2 water capillary absorption classification in accordance with BS EN 1015-18:2002 (EN 998-1:2016)

Sustainability

• Environmental Product Declaration (EPD) available here – latest EPDs can also be viewed at www.environdec.com
• 0.3kg carbon emissions per 1kg of weberpral M (Chalk)
• 0.32kg carbon emissions per 1kg of weberpral M (Colours)

• Do not apply if frost is forecast within 24 hours of use
• Do not apply in damp or wet conditions
• Do not apply in temperatures below 5°C or above 30°C
• Do not apply in direct sunlight or where the substrate is hot
• Not suitable for use on construction board substrate (concrete particle board/render board), use weberend MT
• Not suitable for use on insulation board substrate, use webertherm XP
• When stored unopened in a dry place at temperatures above 5°C, shelf life is 12 months from the date of manufacture printed on the side of the bag