webertec EP injection solutions

webertec EP injection solutions are available as standalone resins, or as part of a kit containing all necessary accessories:

webertec EP injection resin low viscosity is a two-component resin for crack repairs between 0.3-2mm wide. The moisture tolerant resin will structurally bond the fractured sections and seal fine cracks against ingress of water.
webertec EP injection resin thixotropic is a two-component resin for crack repairs between 0.5-8mm. The moisture tolerant resin will repel dampness in the cracks and bond broken substrates.
webertec EP injection kit contains the thixotropic resin and an accessory pack to carry out crack repairs.

Find a stockist

About this system

Low viscosity and thixotropic resins for injection of cracked concrete, masonry and brickwork which can be applied by cartridge and gun.

webertec EP injection resin low viscosity is suitable for:

Structural repairs to fine cracks
Concrete, masonry and suspended floors
Repairing plastic and drying shrinkage cracks

webertec EP injection resin thixotropic is suitable for:

Structural repairs to large cracks up to 8mm
Settlement crack repair in masonry buildings
Repair of cracks to cavity walls
Concrete bridges, retaining walls and highway structures

System build-up

webertec EP injection resin low viscosity

A two-component resin for crack repairs down from 0.3 - 2mm wide. The moisture tolerant resin will structurally bond the fractured sections and seal fine cracks against ingress of water.

Available as a 5 litre standalone product.

webertec EP injection resin thixotropic

A two-component resin for crack repairs between 0.5 and 8mm. The moisture tolerant resin will repel dampness in the cracks and bond broken substrates.

Available as a 5 litre standalone product.

This product is included as part of the webertec EP injection resin kit in a 1 litre pack.

webertec EP injection resin kit

This kit includes:

webertec EP injection resin thixotropic (1 litre)
webertec crack sealer (0.6 litres)
Gun
Nipples
Nipple caps
Clamp & clip
Tube

Injection cartridges

webertec EP injection resin thixotropic

Included in a 1 litre pack in the webertec EP injection resin kit.

Gun

Nipples

Nipple caps

Tube

Clip & clamp

Features and benefits

webertec EP injection resin low viscosity:

Injects into cracks down to 0.3mm
Good penetration into the crack due to low viscosity
Easy-to-use two-component mix
Can be applied in damp environments
Non-shrinkage properties ensuring excellent bond

webertec EP injection resin thixotropic:

Will bond to damp substrates
Can be injected from side only
Gel consistency allows injection to floors, walls and soffits
Non-shrink and high strength

Things to consider

Approximate yield: 1 litre of mixed resin will fill 10 metres of crack at 1mm wide and 100mm depth
Store unopened in a dry place at temperatures above 5°C
Shelf life is 12 months from date of manufacture
Contains epoxy constituents, please avoid skin contact