Weber United Kingdom

Colour Charts

Colour is one of the basic tools a specifier has to add aesthetic appeal to a building or room. See below the full range of colours available for specification from Weber.

It is very important to note that these colour representations are as website and screen resolution permits. For this reason, we strongly recommend a sample is obtained.

Final colour selection must be made against an actual sample.  Weber will not accept responsibility for colours chosen from any source other than an actual sample. Colour samples are available from your local supplier or via our sample service.

Facades

weberpral M

weberpral M is a one-coat, through-coloured monocouche render which is available in a range of 24 colours.  

View the full colour range

weberpral D

weberpral D is a one-coat, through-coloured monocouche render which is available in 12 colours. 

weberpral D is only available in Ireland.

View the full colour range

weberpral MF

weberpral MF a through-colour, one coat fine textured render which will achieve a smoother, more contemporary modern aesthetic. Available in 4 key colours.  

View the full colour range

webertherm M1

webertherm M1 is a one-coat, through-coloured mineral render for use with the webertherm XP External Wall Insulation system and is available in 23 colours. 

View the full colour range 

webermineral TF

webermineral TF  is a thin coat, through-coloured, cementitious, even textured decorative finish for use with multi-coat render systems, available in four colours.

View the full colour range

cullamix tyrolean

cullamix tyrolean is a coloured decorative render finish, which provides an open honeycomb textured Tyrolean finish. Available in six colours.

View the full colour range

flexirend highbuild

Flexirend Highbuild is a decorative and protective resin based surface coating for application to exterior and interior surfaces and is available in six colours.

View the full colour range

weberend RB

weberend RB is the combination of weberend RBB and weberend RBF used together to create a brick-effect finish. Available in four base colours and seven face colours.

View the full colour range

webertherm XB

weberend BPM (brick pointing mortar) and Weber Brick Slips are used with webertherm XB External Wall Insulation system.  Ten brick slip colours and one mortar joint colour are available.

View the full colour range

Synthetic Paint and Textured Finishes

Our synthetic colours are available in three product types and 160 colours...

weberplast TF - Acrylic-based decorative finish with an even textured finish

webersil TF - Silicone-based decorative finish with an even textured finish

webersil P - A solvent-free, water-based silcone paint

View the full colour range

weberend one coat dash

weberend one coat dash is a one coat render that can receive a dry dash finish without the need to apply a second coat.  Available in 3 key colours which can be combined with our range of decorative aggregate blends to create your chosen finish. 

View the full product range

weberend PTC and weberend TTC

Through-coloured top coat renders for use in multi-coat render systems.  Available in six colours.

weberend TTC - can be float finished to take synthetic finishes or dry dashed using decorative aggregates

weberend PTC - versatile polymer-modified, cement-based mortar for use as a render top coat or part of EWI systems

View the full colour range

weberend TTS

 

weberend TTS is a through-coloured decorative top coat render which can achieve a wide range of design options. Most suited to scrape texturing, available in six colours.

View the full colour range

Decorative Aggregates

Weber has a range of decorative aggregate finishes suitable for dry dashing available in 16 colours. 

View the full product range

Tile Grout & Silicone

weberjoint premium

weberjoint premium - our new flexible floor and wall tile grout for joint widths up to 20mm. Rapid setting & water repellent with PURE CLEAN anti-stain technology.  Smooth, durable and efflorescence resistant finish. Available in 18 colours with matching silicones.

View the full colour range

weberjoint pro

weberjoint pro is a scratch-resistant, water-repellent, flexible tile grout for interior and exterior use in situations where some movement or vibration is expected. It can be used for grouting ceramic, porcelain, mosaic, quarry, natural stone, terrazzo and terracotta tiles and is available in 11 colours.

View the full colour range

weberjoint wide flex

weberjoint wide flex is a wide-joint, cement-based, flexible tile grout for interior and exterior use in situations where some movement or vibration is expected.  It can be used for grouting ceramic, porcelain, mosaic, quarry, natural stone, terrazzo and terracotta tiles and brick slips and is available 6 colours.

View the full colour range

weberjoint wide

weberjoint wide is a cement-based grout for interior and exterior use with ceramic wall and floor tiles.  It can be used for grouting ceramic, porcelain, mosaic, quarry, natural stone, terrazzo and terracotta tiles, and brick slips and is available in 4 colours.

View the full colour range

weberjoint wall

weberjoint wall is a cement based grout for interior and exterior use with ceramic wall tiles. It can be used for grouting ceramic, porcelain, mosaic, quarry, natural stone, terrazzo and terracotta tiles on walls and is available in 2 colours.

View the full colour range

weberepox easy

weberepox easy is a two-part, epoxy resin adhesive and grout for interior and exterior use, suitable for ceramic, porcelain, mosaic and quarry tiles etc, on walls and floors.  Available in 8 colours.

View the full colour range

weberjoint silicone

weberjoint silicone is an acetoxy curing silicone sealant that cures to form a tough, flexible, water tight seal – available in clear, white and a range of 17 colours.

View the full colour range

Concrete Protection

webercote smooth

The webercote smooth system provides excellent anti-carbonation protection with a minimum 15 years life expectancy. webercote smooth is both protective and decorative. The system can be applied by brush, roller or spray. Available in four colours.

View the full colour range

webercote EC

webercote EC is a high performance elastomeric anti-carbonation coating for external surfaces, providing a high build protective, elastomeric and decorative finish to exposed concrete and other surfaces. Available in four colours.

View the full colour range

Click Compare to help you choose the right product for your project, if you need further assistance please email technical@netweber.co.uk

Compare