weberfloor timber substrate system is designed for application onto timber substrates. Fibre reinforcement allows application at as little as 10mm thickness. This system can be walked on from as little as 2 hours and is capable of rapid overlay with tiles or a moisture sensitive flooring finish.
weberfloor timber substrate system New system
Fibre-reinforced flooring system for timber substrates finished with floor coverings such as vinyl, laminate, carpet or tiles.
Substrate
Wood
Primer
weberfloor 4716
Water-borne floor primer dispersion for use with all cementitious and hemi-hydrate floor screeds, which can be used as an alternative to a latex floor primer.
Screed
weberfloor fibre rapid 4320
A self-smoothing base and renovation screed which is fibre-modified for added durability:
- Choose weberfloor fibre rapid 4320 for final floor covering in as little as 16 hours
- Choose weberfloor fibre 4310 for final floor covering in as little as 3 days
Tile adhesive
weberset rapid SPF
Use weberset rapid SPF or weberset SPF
Improved rapid set flexible tile adhesive for walls and floors. Our best adhesive for wooden and heated floors when a rapid setting time is required. Suitable for interior and exterior projects. Find the right tile adhesive with our Tile Adhesive Selector →
Final finish
Final floor covering (eg. vinyl, laminate, carpet, tiles)
- Suitable for timber substrates
- Provides an ultra smooth surface – perfect for final floor finishes
- System can be applied at as little as 10mm and up to 50mm
- Foot traffic after 2 hours
- Suitable for rapid overlay with final floor finishes
- Pump or hand applied
- Compatible with weberfloor 4716 acrylic primer
- Cannot be used on external projects
- Substrate must have a pull-off strength ≥1.0MPa
- Substrate must be in a suitable condition to be able to receive a weberfloor screed
