New Build Homes

All New Build Homes products

Weber offer a range of products and systems to support the construction and aesthetics of your new build home. Our products create simplicity in design, reduce building maintenance and extend the life of the structure through the use of high performance, durable and innovative products.

Solutions for New Build Homes

Insulating the Walls

In new-build schemes, insulating on the external walls can be combined with simple and reliable single skin construction, providing cost effective, fast‑track build programmes and attractive facades. The ever increasing thermal requirement of building regulations can be met and exceeded by using the high performance External Wall Insulation systems, providing a weather-proof, durable architectural façade which conserves energy, minimises heat loss and reduces CO2 emissions.

Facades

Our range of renders and decorative finishes offers a selection of house render colours and fast application onto a variety of substrates and includes traditional finishes and advanced flexible coatings.

Weber Monocouche mineral coloured render and one coat base coat render offer short programme times due to their ease of application by spray render pump. The speed of application and reduced drying time offers real saving benefits over traditional sand/cement mix in labour costs and overall site efficiency.

Bathrooms

As well as choosing the perfect tile for your bathroom walls and floor, you need to make sure that the correct adhesive, grout and waterproofing is used to finish the job, this is especially true where wetrooms and underfloor heating is being installed. Our floor levelling products are available to ensure flat and true surfaces before your choice of flooring covering is fitted.

Kitchens

Once you have chosen the perfect tile for your kitchen, you need to make sure that the correct adhesive and grout is used to finish the job. Our wide range allows you to achieve the look you want in your kitchen, whether it's a complementary grout colour for a seamless, consistent feel, or a contrasting colour for your splashback to make a real statement in your home.

Brochures & Guides

Brochure Renders & Decorative Finishes Guide (PDF - 6,4 MB) Download • Send
Add bookmark
Brochure Flooring Guide (PDF - 8,85 MB) Download • Send
Add bookmark
Brochure External Wall Insulation System Guide (PDF - 1,08 MB) Download • Send
Add bookmark

Brochure Tile Fixing Guide (PDF - 9,3 MB) Download • Send
Add bookmark

Renders & Decorative Finishes

Bloor Homes Collection at Fortescue Fields - Norton St Philip

External Wall Insulation

Somerset New Build

Tile Fixing Products

Park House, Windlesham

Problems and Solutions

How to lay large format floor tiles

When tiling with large tiles extra considerations must be made to ensure they are fixed level and firmly in place

Protecting render from algae growth and other contaminants

Whilst monocouche render is low maintenance, like any other building facade it is not immune from the gradual buildup of organic growth and dirt

Removing and replacing existing render

Removing existing render is a large undertaking and is likely to result in damage to the substrate

Apply floor screed to underfloor heating

There are a number of things to consider when applying an underfloor heating screed, but it’s not as complicated as you might think.

Tiling over tiles

Tiling over existing tiles is possible, but there are a few things to first consider.

Strengthening a wooden floor for tiling

Because wooden floors naturally bend, bounce and expand, tiles can end up cracking under the pressure if installed incorrectly.

Tiling on plywood

Tiling on plywood is possible, but you’ll need an appropriately flexible tile adhesive to ensure tiles and grout can stand the test of time against cracking

Tiling onto tongue and groove floorboards and chipboard

It is possible to tile directly onto tongue and groove wooden floors by using an ultra-flexible (S2) tile adhesive, but another option is to strengthen the substrate with either a layer of floor ...

Tiling onto timber or non-tongue and groove floorboards and chipboard

Timber and non-tongue and groove floorboards and chipboard are usually subject to large amounts of deflection/movement, and therefore cannot be tiled onto with even the most flexible of tile adhesives

Working with natural stone - protection/maintenance

Natural stone tiles require careful preparation prior to grouting, and need regular maintenance

Tiling with natural stone

Tiles classed as 'natural materials' vary immensely from ceramics in appearance and application requirements

Tiling onto green screeds or concrete

Newly-laid screeds take time to stabilise, so tiling onto the screed too early can end in disaster as the screed shrinks during the drying process.

Tiling onto floating floors

Floating floors are those which are used to improve insulation and/or to reduce noise. As they are not attached to a rigid substrate, they require extra care when tiling onto.

Tiling onto anhydrite screeds

Anhydrite screeds have become quite popular, but tilers must be aware of a number of potential problems.

Tiling with underfloor heating or under tile warming

Underfloor heating can cause an array of issues if not tiled onto correctly, from cracking due to heat expansion to damaging wires with your trowel.

Application of webersys protect tanking kit

Protecting a water-sensitive substrate

Tiled areas in kitchens, bathrooms and showers can be subject to high humidity or water, which means the a waterproofing layer needs to be applied before laying tiles.

Insulating and rendering a timber-framed construction

Although timber frames are treated, they are vulnerable to rot and need to be kept in a warm, dry environment

See all solutions