weberpral
This means, for many applications only weberpral M (or weberpral D in Ireland) is required to provide a low maintenance through-coloured render which is finished with roughcast texture.
weberpral monocouche roughcast system
Low maintenance
Colours
Textures
Monocouche
weberpral M
weberpral M (or weberpral D in Ireland) applied at a thickness of 15mm with a sprayed/roughcast texture.
weberpral monocouche renders can also be finished with a scraped texture.
Through colour monocouche render which can achieve a scraped or roughcast finish – suitable for most types of brick or blockwork.A single coat render applied in two passes means fast application with shorter programme periods, reduced scaffolding and site costs, as well as earlier completion of ground works.EPD BBA
Optional stipple coat
weberend aid
Depending on the substrate, weberend aid may need to be specified in order to achieve the correct level of suction and key.
weberend aid is required when applying onto:
- Blockwork of an unsuitable density (1350-1450kg/m³ is a suitable density)
- Brickwork without recessed mortar joints
- Concrete
weberend aid is not required when applying onto:
- Blockwork with a density of 1350-1450g/m³
- Brickwork with recessed mortar joints
Substrate
weberpral moncouche renders can be applied onto blockwork, brickwork or concrete substrates, however an application of weberend aid may be required.
Please click the Optional stipple coat layer in the illustration to learn more.
- Single coat for fast application and shorter programme periods
- Formulated to be spray applied by render pump for faster application
- Coloured render for low maintenance with no further decoration required
- Can be used to create a roughcast render finish (for scraped finish, see weberpral monocouche scraped system)
- Weather and algae-resistant
BBA approved certificate no. 17/5464
- Substrates must have a good mechanical key suitable for rendering, weberend aid must be used to provide an artificial key on substrates such as smooth concrete
- Do not apply if frost is forecast within 24 hours of use
- Do not apply in damp or wet conditions
- Do not apply in temperatures below 5°C or above 30°C
- Do not apply in direct sunlight or where the substrate is hot
- Not suitable for use on construction board substrate (concrete particle board/render board), use weberend MT
- Not suitable for use on insulation board substrate, use webertherm XP
- When stored unopened in a dry place at temperatures above 5°C, shelf life is 12 months from the date of manufacture printed on the side of the bag
