weberfloor industry pro top 4610
Packaging
- 25kg
Premium self-smoothing industry topping screed suitable for industrial areas.
weberfloor industry pro top 4610 is a premium self-smoothing industrial floor screed which can be applied to depths of 4-15mm used for levelling:
- Concrete
- Base screeds
- Anhydrite screeds
weberfloor industry pro top 4610 can be left uncovered, or can be covered with:
- Epoxy resin coatings
- Polyurethane coatings
Suitable for use in industrial areas, light foot traffic is possible after 2-4 hours in normal conditions and final floor coverings can be applied after 24hrs depending on layer thickness and drying conditions. Light industrial traffic is possible after 24hrs, with full industrial traffic suitable after 1 week.
- For application depths between 4-15mm
- Pump or hand applied
- Foot traffic after 2-4 hours
- Light industrial traffic after 24 hours
- Full industrial traffic after 1 week
- Super flat and smooth finish minimises wear and enables high storing shelves
- Very high durability towards mechanical stress - long lifetime
- Low alkalinity
- Casein-free
- Low emissions
- Cannot be used on external projects
- When stored unopened in a cool, dry place at temperatures above 5°C, shelf life is 12 months from date of manufacture
- Please refer to relevant building regulations prior to the installation of weberfloor products
Temperature of application | +10°C to +25°C |
Minimum substrate strength | 1.5N/mm² |
Minimum thickness | 4mm |
Maximum thickness | 15mm |
Water addition | 5 litres/ 25kg (20%) |
Compressive Strength | C 35 |
Flexural Strength | F 10 |
Shrinkage (28 days) | < 0.07% |
Flow Rate | 230-250mm |
Approx. material consumption | 17kg/m2/mm |
Hardening time (before foot traffic) | 2-4 hours in normal conditions |
Hardening time (before final covering) | 24 hours depending on layer thickness and drying conditions |
Pot life | 20 |
Wear resistance (steel wheel, class) | BCA class AR 0.5 |
Wear resistance (RW (defined) class) | RWA 100 |
Pendulum Test Value (dry) | 65 - Low potential for slip* |
Pendulum Test Value (wet) | 40 - Low potential for slip* |
Pendulum Test Value (oil) | 16 - High potential for slip* |