Roads, Bridges & Railways — Thelwell Viaduct

Technical Mortars

All Technical Mortars Solutions

Technical mortars solutions for major infrastructure contracts, social housing refurbishment and highways projects.

Concrete Repair

Products designed for small patch repairs and concrete for larger areas where sprayed and flowing materials are best employed

Concrete Protection

High performance, anti-carbonation coatings to increase durability of reinforced concrete and provide long-term protection of existing concrete and new repairs

Precision Grouting

Cementitious or resin-based durable grouts which are dimensionally stable and are able to transfer loads effectively

Bedding Mortars

Cementitious or resin-based durable grouts which are dimensionally stable and are able to transfer loads effectively

Structural Strengthening

The webertec force composite system offers the unique benefits of using a non-corrosive material for structural strengthening

Ancillary Products

A universal solvent-based cleaner for removing uncured epoxy and polyester resins

West Midland Safari Park Ice Age exhibit featuring weber TXT mortar from Saint-Gobain Weber

Technical Mortars Solutions

West Midland Safari Park, Bewdley

In the new Ice Age exhibit at the West Midland Safari Park in Bewdley, Worcestershire, weber TXT mortar by Saint-Gobain Weber has been used extensively

Technical Mortars Solutions

weber TXT mortar steps back in time to the formation of the Ice Age

weber TXT mortar has been used in the new Ice Age exhibit at the West Midland Safari Park

Technical Mortars Solutions

Farnborough Airport

The installation of a landing light system required the excavation of several 100mm wide by 200mm deep trenches running across the main landing strip.

Technical Mortars Solutions

Glasgow Airport Runway 05/23

Glasgow Airport main runway was nearing the end of its design life and strengthening works were required to rebuild runway 05/23. Work involved strengthening the central section for aircraft ...

Technical Mortars Solutions

Dry-spray concrete enables fast refurbishment of River Neath Bridge

Specification of high performance webercem spray RS, a rapid setting dry-spray concrete by Saint-Gobain Weber, has enabled specialist contractor Freyssinet Limited to carry out the strengthening of ...

Technical Mortars Solutions

Safestore Ltd HQ, Borehamwood

High performance webercem concrete repair system has been specified for a smart exterior makeover to a unique building.

Technical Mortars Solutions

Blair's Bridge, Redding

High performance webercem spray DSF was specified for the repair of a concrete retaining wall on the approach to Blair’s Bridge

Technical Mortars Solutions

Nothe Fort, Weymouth Harbour

High performance spray repair concrete by Saint-Gobain Weber has been used to fortify the sea wall that acts as a coastal defence to Nothe Fort at Weymouth Harbour, Dorset.

Technical Mortars Solutions

River Neath Bridge, South Wales

Specification of high performance webercem spray RS, a rapid setting dry-spray concrete has enabled specialist contractor Freyssinet Ltd to carry out the strengthening of the bridge piers over River ...

Technical Mortars Solutions

Coronation Parade, Folkestone

High performance webercem spray RS repair concrete was specified for the protection of a 1930s sea wall damaged by decades of continuous tidal erosion

Technical Mortars Solutions

Earth Embankment, Dunoon

webercem spray DSF has been specified for the critical stabilisation of an earth embankment in Dunoon, Scotland

Technical Mortars Solutions

Kingston Wharf, Isle of Wight

High performance concrete repair products by Weber have been used in the remediation and protection of two commercial shipping wharves at Kingston in East Cowes.

Technical Solutions

Installing precast kerbs or drainage units

Precast kerbs can be glued together with a special structural adhesive available from Weber. Ultra quick bedding mortars can also be mixed and applied to minimise traffic disruption

Installing stone setts, paving and block paviours

When reinstating or installing hard landscaping materials in busy pedestrianised shopping areas, a number of problems are caused due to the long setting times of conventional mortars

Defective concrete pavements

Concrete pavements deteriorate over time due to exposure to severe weather conditions and excessive traffic loading of the concrete

Grouting crane rails

The mechanics of rail behaviour under load from cranes and trains needs to be understood and Weber have provided solutions in this field for over 30 years

Strengthening walls

Reinforced concrete and masonry walls need to be strengthened against undue wind loads, deflections, additional loads, shear cracks and extraordinary loads due to explosion or impact

Under-strength columns

Column wrapping is a technique perfected by Weber using a variety of specialist unidirectional or woven fibre sheets bonded with a strong epoxy glue

Cathodic protection

Impressed current cathodic protection can control corrosion, counteract the incipient anode effect, and can reduce the amount of concrete removal

Increasing resistivity

The resistivity of reinforced concrete may be increased by the application of various solutions from Weber

Preserving or restoring passivity

The corrosion of steel reinforcement in concrete can be minimised by replacing concrete cover with high quality repair mortars and concretes from Weber

Grouting bridge bearings

Weber has a range of products suitable for pumping under bearings or for pouring or for gluing elastomeric pads

Under-strength floor slabs

webertec force composite strengthening system can be designed and used to provide extra load capacity when an existing building is undergoing a change of use

Ironwork reinstatement

Road ironwork such as manhole covers, road gullies and duct covers need to be bedded with a resilient mortar to prevent the unit rocking or breaking up under traffic loading

Increasing physical resistance

Specialist methods of reinstatement and special products are available from Weber to enhance the durability of buildings and structures

Structural strengthening

Several structural strengthening products from Weber can be used to enhance the load carrying capacity of concrete structures

Moisture control

Keeping concrete dry is one way of reducing damage to concrete and this can be achieved by using one of Weber's coatings or sealers

Damaged street furniture

Quick drying post setting compounds as well as rapid setting anchoring grouts are available from Weber when timely intervention and repair are of paramount importance

Grouting steel baseplates

A good quality precision grout, whether resin-based or cementitious must provide good load transfer and be easy to apply under most conditions

Under-strength beams

The webertec force composite strengthening system can reinstate the structural integrity of reinforced concrete beams

Concrete restoration

Concrete damage has many causes with various different solutions to restore the structure

Protection against ingress

A range of specialist products are available from Weber that can protect concrete from the ingress of water and chemicals

See all solutions

Brochures & Guides

Brochure Bedding Mortar Guide (PDF - 3,02 MB) Download • Send
Add bookmark
Brochure Solutions for Airports (PDF - 2,36 MB) Download • Send
Add bookmark
Brochure Concrete Repair & Protection Guide (PDF - 3,12 MB) Download • Send
Add bookmark

Brochure Precision Grouting Guide (PDF - 2,39 MB) Download • Send
Add bookmark
Brochure Marine Infrastructure Guide (PDF - 4,83 MB) Download • Send
Add bookmark