weberend acrylic system

weberend acrylic system is designed for application onto suitable masonry substrates, but a layer of weberend aid preparatory stipple render may be required (see system build-up below for more information).

Applied with weberend OCR (or weberend MPR in Ireland) base coat render and then primed with weber PR310, this system is finished with weberplast TF, a water resistant acrylic textured finish available in a wide range of over 100 colours.

Use multiple finishes on the same project

This system can be used in conjunction with the weberend brick system for building designs which require a mix of brick and render finishes.

Final façade finish:

• Finished with weberplast TF silicone textured finish with enhanced water resistance and available in over 100 colours.

Suitability:

• Factory batched materials for consistency.

Do not apply:

• If frost is forecast within 24 hours of use.
• In damp/wet conditions.
• In temperatures below 5°C or above 30°C.
• On elevations in direct sunlight or where the substrate is hot.