weberend MT panel acrylic system

weberend MT panel acrylic system is designed for application onto an appropriately-framed calcium silicate panelled background.

Applied with weberend LAC rapid resin-rich adhesive render coat and strengthened with glass-fibre weber standard meshcloth, this system doesn't require the use of primers, saving time lost waiting for primers to dry.

Water resistant weberplast TF is used as the final finish to provide an acrylic textured finish available in a wide range of over 100 colours.

Use multiple finishes on the same project

This system can be used in conjunction with the weberend MT panel brick system for building designs which require a mix of brick and render finishes.

Final façade finish:

• Finished with weberplast TF silicone textured finish with enhanced water resistance and available in over 100 colours.

Reaction to fire:

• B-s1,d0 reaction to fire classification in accordance with BS EN 13501. Extended application report on request.

Suitability:

• Large areas can be rendered on calcium silicate panels without the need for expressed joints.
• Strengthened with glass-fibre weber standard meshcloth.
• Factory batched materials for consistency.

Fixing recommendations:

Prior to installation please contact compatible substrate board manufacturer to obtain fixing recommendations and ensure board suitability when withstanding necessary wind load requirements for your specific project.

Do not apply:

• If frost is forecast within 24 hours of use.
• In damp/wet conditions.
• In temperatures below 5°C or above 30°C.
• On elevations in direct sunlight or where the substrate is hot.