weberend silicone system

weberend silicone system is designed for application onto suitable masonry substrates, but a layer of weberend aid preparatory stipple render may be required (see system build-up below for more information).

Applied with weberend OCR (or weberend MPR in Ireland) base coat render and then primed with weber PR310, this system is finished with webersil TF, an enhanced water resistant silicone textured finish available in a wide range of over 100 colours.

Use multiple finishes on the same project

This system can be used in conjunction with the weberend brick system for building designs which require a mix of brick and render finishes.

Final façade finish:

• Finished with webersil TF silicone textured finish with enhanced water resistance and available in over 100 colours.

Suitability:

• Factory batched materials for consistency.

Do not apply:

• If frost is forecast within 24 hours of use.
• In damp/wet conditions.
• In temperatures below 5°C or above 30°C.
• On elevations in direct sunlight or where the substrate is hot.