webersil TF
webersil TF
Silicone thin coat render with enhanced water resistance applied in wet form that produces an even textured finish in a wide range of colours.
Packaging
- 15kg
Suitable for:
Wall
Colours
Textures
webersil TF is a silicone thin coat render for application onto a suitable base coat or adhesive coat render which provides an even textured finish with enhanced water resistance – a reliable solution for harsh or exposed conditions.
webersil TF is the final render finish for the weberend MT panel silicone system render system or the webertherm XM external wall insulation system.
Final façade finish:
- Enhanced water resistant finish (W3) providing optimum façade protection with low susceptibility to soiling
- Available in a wide range of over 100 colours
- Provides an even textured finish with 1.5mm aggregate content
- Highly vapour permeable and UV stable
Application:
- Ready to apply in wet form by hawk and trowel or by spray
- Applied onto a suitable base coat or adhesive coat render
Certification & classification:
- BBA approved as part of:
- W3 liquid water permeability classification in accordance with EN 1062-3:2008 (EN 15824:2017)
- A2-s1,d0 reaction to fire classification in accordance with EN 13501-1:2018 (EN 15824:2017)
- Do not apply if frost is forecast within 24 hours of use
- Do not apply in damp/wet conditions
- Do not apply in temperatures below 5°C or above 30°C
- Not suitable for application onto elevations in direct sunlight or where the substrate is hot
- When stored under appropriate conditions, the shelf life of the product is 12 months from the date of manufacture
Tutorials and videos
Case studies
